This is a working overview of Collapse temperature, written for readers who want more than a one-paragraph summary but less than a textbook.
This page was last updated on 2026-07-05 and is reviewed periodically as new material appears.
Freeze-drying is distinct from simple evaporation and from spray drying. Evaporation removes water at temperatures above freezing, while spray drying rapidly dries droplets in a heated gas stream. Lyophilization avoids high temperatures, which can be useful for heat-sensitive materials such as proteins, vaccines, and some foods. The porous cake produced by sublimation dissolves or rehydrates more quickly than a dense dried mass. Not all materials tolerate freezing or the pH shifts that can occur as solutes concentrate during ice formation.
Lyophilization removes water from a frozen material by sublimation under reduced pressure. The process begins with freezing, which converts liquid water into ice and fixes the structure of the sample. After freezing, primary drying lowers pressure so ice changes directly to vapor without passing through a liquid phase. Secondary drying then removes bound water that remains after ice sublimation. The result is a dry, porous solid that often retains its original shape.
Formulation composition influences whether freeze-drying produces an intact cake or a collapsed mass. Excipients such as sugars and polymers can raise the collapse temperature and provide bulk during drying. The critical temperature for primary drying is often the collapse temperature or the glass transition temperature of the maximally concentrated phase. If the product temperature exceeds this threshold, the frozen matrix may soften and lose structure. Established practice therefore links shelf temperature and chamber pressure to the formulation's thermal properties.
The physics of freeze-drying couples heat transfer, mass transfer, and phase change. Heat supplied through the shelf must reach the sublimation front without melting the ice or degrading the product. Water vapor then travels through the already dried layer and leaves the chamber, where low pressure and cold traps keep it from returning. The dried layer acts as a resistance to vapor flow, so drying rate changes as the front recedes. Open questions remain about how pore structure and formulation heterogeneity affect drying uniformity at larger scales.
Lyophilization removes water from a frozen material by sublimation under reduced pressure. The process begins with freezing, which converts liquid water into ice and concentrates dissolved solids. Primary drying then lowers chamber pressure so ice changes directly into vapor without passing through a liquid phase. Secondary drying raises the shelf temperature to remove bound water that remains after ice sublimation. The result is a dry, porous structure that can be reconstituted later.
| Property | Value | Notes |
|---|---|---|
| Primary phase change | Sublimation | Ice changes directly to vapor under reduced pressure |
| Typical chamber pressure | 0.01–0.5 mbar (1–50 Pa) | Below the triple point of water; product-specific |
| Typical product temperature during primary drying | −40 °C to −10 °C | Kept below collapse temperature |
| Typical residual moisture | 0.5–3% w/w | Target range varies by formulation and use |
| Common synonyms | Freeze-drying; lyophilisation | Lyophilization is the US spelling |
In practice, lyophilization is slower and more energy intensive than simple drying. Cycle times can range from hours to several days depending on load, container, and formulation. Amorphous materials may require excipients that help preserve structure during freezing and drying. The method is widely used for biological materials, pharmaceuticals, and foods where heat drying would cause unacceptable change. Open questions remain about scaling cycles between laboratory and production equipment, and this gap affects technology transfer.
Lyophilization removes water by freezing a material and then lowering pressure so ice changes directly to vapor. The process relies on sublimation, the phase transition from solid to gas without an intermediate liquid state. Because the material remains frozen during primary drying, the structure often stays porous. This porous matrix can rehydrate quickly when water is added back. The low pressure also allows vapor to leave the solid matrix without boiling.
A freeze-dryer consists of a vacuum chamber, temperature-controlled shelves, a condenser, and a vacuum pump. Vials, ampoules, or bulk trays hold the product during the cycle. The condenser traps water vapor as ice at a temperature lower than the product. Cycle development balances shelf temperature, chamber pressure, and time. Scale-up can be difficult because heat and mass transfer change with equipment size, so process analytical tools and conservative validation are often used.
Lyophilization is a dehydration technique in which a product is frozen and the solvent is removed under reduced pressure. The low pressure allows ice to sublimate directly into vapor without passing through a bulk liquid phase. This differs from conventional drying, where heat drives evaporation and can damage heat-sensitive structures. The process is used for biological materials, pharmaceutical formulations, and some foods. Its main advantage is preservation of porous structure and rapid reconstitution.
The process relies on the phase diagram of water, where the triple point marks the conditions at which ice, liquid water, and vapor coexist. By maintaining pressure below this point, typically around 0.01 to 0.1 millibar, sublimation becomes the dominant mechanism. Formulations often include excipients such as sugars or polymers that act as lyoprotectants and bulking agents. These additives help preserve the structure of the active ingredient and prevent collapse during drying. The choice of excipient and freezing rate influences the final cake morphology and stability.
Industries use lyophilization for pharmaceuticals, biological products, and food preservation. In the pharmaceutical sector, it extends the shelf life of injectable drugs, vaccines, and proteins that are unstable in aqueous solution. Food manufacturers apply freeze-drying to coffee, fruits, and ready meals to retain flavor and texture. The process is energy-intensive and requires specialized equipment, which limits its use to high-value products. Ongoing research examines how formulation and process parameters affect the quality of the final dried product.
Lyophilization, also known as freeze-drying, is a process that removes water from a material by freezing it and then reducing pressure to allow ice to sublimate directly into vapor. The method begins with a freezing step that solidifies the water content. Next, primary drying lowers the pressure below the triple point of water, enabling sublimation without passing through a liquid phase. A final secondary drying step removes bound water through desorption. This sequence produces a dry, porous cake that can be reconstituted later.
Anne-Claude Gingras is a senior investigator at Lunenfeld-Tanenbaum Research Institute, and a professor in the department of molecular genetics at the University of Toronto. She is an expert in mass spectrometry based proteomics technology that allows identification and quantification of protein from various biological samples. Gingras was born on Île d'Orléans, Quebec. She earned her undergraduate degree at Université Laval in Quebec. She completed her PhD in biochemistry at McGill University in Montreal, studying how 4E-BP1 regulated translation initiation, under the mentorship of Nahum Sonenberg. After graduating in 2001, she began postdoctoral research in Seattle at the Institute for Systems Biology in the lab of Ruedi Aebersold, where she studied proteomics for three years. In 2005, Gingras moved to Toronto and joined the Lunenfeld-Tanenbaum Research Institute, and in 2006, she began teaching at the University of Toronto in the department of molecular genetics.
7-Dehydrocholesterol (7-DHC) is a zoosterol that functions in the serum as a cholesterol precursor, and is photochemically converted to vitamin D3 in the skin, therefore functioning as provitamin-D3. The presence of this compound in human skin enables humans to manufacture vitamin D3 (cholecalciferol). Upon exposure to ultraviolet UV-B rays in the sun light, 7-DHC is converted into vitamin D3 via previtamin D3 as an intermediate isomer. It is also found in the milk of several mammalian species. Lanolin, a waxy substance that is naturally secreted by wool-bearing mammals, contains 7-DHC which is converted into vitamin D by sunlight and then ingested during grooming as a nutrient. In insects 7-dehydrocholesterol is a precursor for the hormone ecdysone, required for reaching adulthood. 7-DHC was discovered by Nobel-laureate organic chemist Adolf Windaus.
Akin to ordinary ink printers, bioprinters have three major components to them. These are the hardware used, the type of bio-ink, and the material it is printed on (biomaterials). Bio-ink is a material made from living cells that behaves much like a liquid, allowing people to 'print' it in order to create the desired shape. To make bio-ink, scientists create a slurry of cells that can be loaded into a cartridge and inserted into a specially designed printer, along with another cartridge containing a gel known as bio-paper. In bioprinting, there are three major types of printers that have been used. These are inkjet, laser-assisted, and extrusion printers. Inkjet printers are mainly used in bioprinting for fast and large-scale products. One type of inkjet printer, called drop-on-demand inkjet printer, prints materials in exact amounts, minimizing cost and waste. Printers that use lasers provide high-resolution printing; however, these printers are often expensive. Extrusion printers print cells layer-by-layer, just like 3D printing to create 3D constructs. In addition to just cells, extrusion printers may also use hydrogels infused with cells.
Tripartite motif-containing 24 (TRIM24) also known as transcriptional intermediary factor 1α (TIF1α) is a protein that, in humans, is encoded by the TRIM24 gene. The protein encoded by this gene mediates transcriptional control by interaction with the activation function 2 (AF2) region of several nuclear receptors, including the estrogen, retinoic acid, and vitamin D3 receptors. The protein localizes to nuclear bodies and is thought to associate with chromatin and heterochromatin-associated factors. The protein is a member of the tripartite motif (TRIM) family. The TRIM motif includes three zinc-binding domains – a RING, a B-box type 1 and a B-box type 2 – and a coiled-coil region. Two alternatively spliced transcript variants encoding different isoforms have been described for this gene. TRIM24 has been shown to interact with Mineralocorticoid receptor, TRIM33, Estrogen receptor alpha and Retinoid X receptor alpha. Transcription coregulator
Sources: en.wikipedia.org
Different amino-acid sequences have different propensities for forming α-helical structure. Alanine, uncharged glutamate, leucine, charged arginine, methionine and charged lysine have especially high helix-forming propensities, whereas proline and glycine have poor helix-forming propensities. Proline either breaks or kinks a helix, both because it cannot donate an amide hydrogen bond (because it has none) and because its sidechain interferes sterically with the backbone of the preceding turn – inside a helix, which forces a bend of about 30° in the helix's axis. However, proline is often the first residue of a helix, presumably due to its structural rigidity. At the other extreme, glycine also tends to disrupt helices because its high conformational flexibility makes it entropically expensive to adopt the relatively constrained α-helical structure.
It might occur either at the enzyme or receptor level. There are two possible outcomes at the enzyme level: competitive inhibition or enzyme activity reactivation. Ethyl alcohol or fomepizole used in methyl alcohol or ethylene glycol poisoning is a typical example of competitive enzyme inhibition. By posing competition for alcohol dehydrogenase (ADH) with methyl alcohol and ethylene glycol, these drugs reduce the production of harmful metabolites. For receptor level, the traditional antidotes include naloxone and flumazenil. Flumazenil functions as a competitive antagonist at the GABA-A receptor complex's benzodiazepine site. By doing this, the CNS and respiratory depression would reverse and the inward chloride current would reduce. Flumazenil is useful in treating and preventing benzodiazepine-induced coma from recurring.
Milk immunity is the protection provided to immune system of an infant via the biologically active components in milk, typically provided by the infant's mother. All mammalian milk contains water, sugar, fat, vitamins, and protein, with the variation within and between species and individuals differing mainly in the amount of these components. Other than the variation in quantity of these components, not a lot is known about bio-active or immune-modulating factors in many mammalian species. However, in comparison to other mammalian milk, human milk has the most oligosaccharide diversity. Ruminant mothers do not transfer immunity to their infants during pregnancy, which makes milk the first introduction to maternal immunity calves receive. Bovine milk contains both immunoglobulins A and G, but in contrast to human milk where IgA is the most abundant, IgG is more abundant. Secretory component, IgM, both anti-inflammatory and inflammatory cytokines, and other proteins with antimicrobial functions are also present in bovine milk.
In molecular biology, and more importantly high-throughput DNA sequencing, a chimera is a single DNA sequence originating when multiple transcripts or DNA sequences get joined. Chimeras can be considered artifacts and be filtered out from the data during processing to prevent spurious inferences of biological variation. However, chimeras should not be confused with chimeric reads, which are generally used by structural variant callers to detect structural variation events and are not always an indication of the presence of a chimeric transcript or gene. In a different context, the deliberate creation of artificial chimeras can also be a useful tool in molecular biology. For example, in protein engineering, "chimeragenesis" (forming chimeras between proteins that are encoded by homologous cDNAs) is one of the "two major techniques used to manipulate cDNA sequences". For gene fusions that occur through natural processes, see chimeric genes and fusion genes.
The amino acids in an α-helix are arranged in a right-handed helical structure where each amino acid residue corresponds to a 100° turn in the helix (i.e., the helix has 3.6 residues per turn), and a translation of 1.5 Å (0.15 nm) along the helical axis. Dunitz describes how Pauling's first article on the theme in fact shows a left-handed helix, the enantiomer of the true structure. Short pieces of left-handed helix sometimes occur with a large content of achiral glycine amino acids, but are unfavorable for the other normal, biological L-amino acids. The pitch of the alpha-helix (the vertical distance between consecutive turns of the helix) is 5.4 Å (0.54 nm), which is the product of 1.5 and 3.6. The most important thing is that the N-H group of one amino acid forms a hydrogen bond with the C=O group of the amino acid four residues earlier; this repeated i + 4 → i hydrogen bonding is the most prominent characteristic of an α-helix. Official international nomenclature specifies two ways of defining α-helices, rule 6.2 in terms of repeating φ, ψ torsion angles (see below) and rule 6.3 in terms of the combined pattern of pitch and hydrogen bonding. The α-helices can be identified in protein structure using several computational methods, such as DSSP (Define Secondary Structure of Protein).
Sources: en.wikipedia.org
The therapeutic index (TI) is used to quantify the risks and benefits of a certain drug. It describes the relationship between toxic dose and minimum effective dose, thus providing an important insight into the safety of a drug. The Therapeutic Index is calculated using the following equation: TI = TD50 / ED50, where TD50 is the dose at which toxicity presents in 50% of the population, and ED50 is the dose needed to produce 50% of maximal response. From the equation, a high TI indicates that the drug needs a high dose to induce toxicity in 50% of the population or a low dose to achieve the minimum effective dose, and vice versa. In the case of physiological antagonists, for example, insulin has a narrow TI. A narrow TI indicates that either excess or lack of insulin can cause significant risks. On one hand, lack of insulin may result in high blood glucose levels and kidney or cardiovascular damage. On the other hand, excess insulin may result in insulin-induced hypoglycemia as aforementioned. Another example is dimercaprol, a chemical antagonist in treating metal toxicity. Dimercaprol has a narrow TI so it is replaced by its derivative, 2,3-dimercaptosuccinic acid (DMSA).
The book has generally been received well by the scientific community. According to Doty, those critical of the book range from people who refuse to read it to those who have semantic issues with the pheromone concept and its applicability to mammals. Peter Brennan argues that Doty does not consider some of the more recent scientific research that conflicts with his views. He cites a 2010 study in mice that reports the discovery of a urinary protein that attracts female mice. Brennan concludes: "I suspect that the majority of researchers will continue to use the term [pheromone], despite all of its shortcomings. But after reading this book, I will certainly be more circumspect when referring to pheromones in future."
Chattopadhyay's contributions in membrane and receptor biology and biophysics have been recognized by several awards and prizes. These include The World Academy of Sciences (TWAS) Prize, Shanti Swarup Bhatnagar Award, Ranbaxy Research Award, Prof. G.N. Ramachandran Gold Medal, SERB Distinguished Fellowship, Prof. G.N. Ramachandran 60th Birthday Medal and J.C. Bose Fellowship. He is an elected Fellow of The World Academy of Sciences, Royal Society of Biology, Royal Society of Chemistry, and all the Indian Academies of Science. Fellow, The World Academy of Sciences (2017) Fellow, The Royal Society of Biology (2017) Fellow, The Royal Society of Chemistry (2013) Fellow, Indian National Science Academy (2005) Fellow, Indian Academy of Sciences (1999) Fellow, The National Academy of Sciences, India (1998) Fellow, West Bengal Academy of Science & Technology (2010) Fellow, Andhra Pradesh Akademi of Sciences (2003) Fellow, Telangana Academy of Sciences (2015) Google Scholar
Many different amino acid side chains have been described as ADP-ribose acceptors. From a chemical perspective, this modification represents protein glycosylation: the transfer of ADP-ribose occurs onto amino acid side chains with a nucleophilic oxygen, nitrogen, or sulfur, resulting in N-, O-, or S-glycosidic linkage to the ribose of the ADP-ribose. Originally, acidic amino acids (glutamate and aspartate) were described as the main sites of ADP-ribosylation. However, many other ADP-ribose acceptor sites such as serine, arginine, cysteine, lysine, diphthamide, phosphoserine, and asparagine have been identified in subsequent works.
GPCRs become desensitized when exposed to their ligand for a long period of time. There are two recognized forms of desensitization: 1) homologous desensitization, in which the activated GPCR is downregulated; and 2) heterologous desensitization, wherein the activated GPCR causes downregulation of a different GPCR. The key reaction of this downregulation is the phosphorylation of the intracellular (or cytoplasmic) receptor domain by protein kinases. Cyclic AMP-dependent protein kinases (protein kinase A) are activated by the signal chain coming from the G protein (that was activated by the receptor) via adenylate cyclase and cyclic AMP (cAMP). In a feedback mechanism, these activated kinases phosphorylate the receptor. The longer the receptor remains active the more kinases are activated and the more receptors are phosphorylated. In β2-adrenoceptors, this phosphorylation results in the switching of the coupling from the Gs class of G-protein to the Gi class. cAMP-dependent PKA mediated phosphorylation can cause heterologous desensitisation in receptors other than those activated.
Sources: en.wikipedia.org
Lyophilization relies on sublimation, so water moves from solid ice to vapor without becoming liquid. The material is frozen, pressure is reduced, and controlled heat is supplied. Vapor is captured on a cold condenser, leaving a dry porous solid.
The process has three main stages: freezing, primary drying, and secondary drying. Freezing sets the ice structure, primary drying removes free ice, and secondary drying removes bound water. Each stage uses specific temperature, pressure, and time settings.
No, it is a drying method rather than a sterilization method. Removing water can limit microbial growth, but it does not reliably kill microorganisms. Sterility must come from separate steps such as filtration, heat treatment, or aseptic processing.
Primary drying removes ice by sublimation at low pressure and low shelf temperature. Secondary drying removes bound water by raising the shelf temperature, often under the same vacuum. The two stages differ in the water state being removed.